XH2.54 2S/3S/4S/5S/6S/7S/8S/9S With Soft Silicone wire 20AWG/22AWG Soft Silicone wire Balance Cables

XH2.54 Balancer Cables 6S Lipo Lithium cable XH2.54 6S Cables JST-XH 2.54mm connector is the industry standard for RC LiPo battery balance

Branching Dual-Terminal Harness: 4.2mm Ring Terminal (2 Wires) to Split 4.2mm Ring + 6.3mm Quick Release with UL1015 18AWG Yellow/Green Wire

Product OverviewA professional branching wire harness designed for applications requiring power splitting or dual-circuit connections. Features two 18AWG wires crimped into a single 4.2mm ring terminal on one end, branching into two separate terminals on the other end: one 4.2mm ring terminal and one 6.3mm quick-release (fast-on) locking terminal. Constructed with UL1015-rated 18AWG yellow/green wire for easy identification and safety compliance.Technical SpecificationsWire SpecificationsGauge: 18AWG (0.823 mm²)Type: UL1015 Approved, 600V RatedInsulation: PVC, Yellow with Green Stripe (Yellow/Green)Temperature Range: -40°C to +105°CStandard Lengths: 12″, 18″, 24″, 36″ (custom available)Current Rating: Up to 10A continuous per conductorCommon End (One Side)Terminal Type: 4.2mm fully-insulated ring terminalConfiguration: Two 18AWG yellow/green wires crimped into single terminal barrelInner Diameter: 4.2mm (fits M4, #8 hardware)Material: Tin-plated copperInsulation: Nylon, color-codedSplit End (Other Side)Ring Terminal Branch:Terminal Type: 4.2mm ring terminalWire: Single 18AWG yellow/greenInner Diameter: 4.2mmQuick-Release Terminal Branch:Terminal Type: 6.3mm female quick-disconnect with locking tabWire: Single 18AWG yellow/greenBlade Size: 0.250″ (6.35mm) wideFeature: Locking tab prevents accidental disconnectionKey FeaturesPower-Splitting Design: Distributes power from one source (common ring terminal) to two separate circuits/devicesDual-Wire Crimp: Professional dual-wire crimp at common terminal ensures secure, low-resistance connectionVersatile Connection Options: Combines permanent (ring) and removable (quick-release) terminals in one harnessSafety Color Coding: Yellow/green wire commonly used for grounding or safety-critical circuits (can be customized)Locking Quick-Release: Prevents vibration-induced disconnects—depress tab to releaseUL-Listed Components: All materials meet UL1015 and relevant terminal standardsFactory Assembled: Precision crimped, pull-tested, and continuity verifiedTypical ApplicationsGround Distribution: Single ground point splitting to two devices (one permanent, one removable)Accessory Power: Single power source feeding both a fixed accessory (ring) and removable accessory (quick-release)Automotive/Marine: Battery ground distributing to chassis ground and a removable accessory groundIndustrial Control: Common power/ground connection splitting to sensor (fixed) and indicator (removable)Audio Systems: Amplifier ground splitting to head unit ground and removable crossover groundSolar Installations: Common connection branching to charge controller (ring) and monitoring device (quick-release)Custom Electronics: Prototyping and permanent installations requiring split circuits with different connection typesInstallation InstructionsCommon End: Secure the dual-wire 4.2mm ring terminal under appropriate bolt (M4/#8) with recommended torque (1.0–1.2 Nm)Ring Terminal Branch: Connect single 4.2mm ring to permanent device/ground pointQuick-Release Branch: Push onto 6.3mm male tab of removable device until locking tab clicksDisconnection: To remove quick-release end, depress locking tab and pull wire awayRouting: Secure wires with cable ties; avoid sharp bends near terminalsSafety & Electrical NotesMaximum Current: Total current through common terminal should not exceed 16A (derated for dual wires)Polarity: Yellow/green is typically used for ground/safety earth—verify your application requirementsEnvironmental: Suitable for engine bays, marine, and industrial environments within temperature ratingsInspection: Check terminals periodically for corrosion or loosening in high-vibration applicationsPackage OptionsSingle Harness: One complete branching assemblyInstallation Pair: Two harnesses for balanced positive/negative or dual-circuit setupsCustom Configurations: Available for OEM/bulk orders:Different wire colors (red, black, blue, etc.)Alternative terminal sizesCustom lengthsDifferent terminal combinationsWhy Choose This Branching Harness?Clean Installation: Eliminates messy DIY splices and improper crimpingTime-Saving: Pre-engineered solution saves assembly timeReliable: Factory crimping ensures optimal conductivity and strain reliefProfessional Appearance: Uniform, color-coded wiring improves system organizationVersatile: Solves unique connection challenges with mixed terminal typesCompliance & Quality AssuranceWire: UL1015 RecognizedTerminals: Meet industry dimensional and material standardsRoHS & REACH CompliantTesting: Each harness continuity tested; batch pull-test performedWorkmanship: 100% visual inspection for proper crimps and insulationIdeal for organized power distribution with mixed connection requirements.Select your preferred length at checkout. Contact us for custom wire colors or terminal configurations for OEM projects (minimum order 500 pieces).

Dual-Terminal Wire Assembly: 6.3mm Locking Quick Release & 4.2mm Ring Terminal with UL1015 16AWG Blue Wire

Product OverviewA professional-grade, pre-assembled wire harness featuring a 6.3mm locking quick-release (fast-on) terminal on one end and a 4.2mm fully-insulated ring terminal on the other, connected by high-quality UL1015 16AWG blue wire. Designed for applications requiring both quick-connect functionality and a secure, vibration-resistant ring connection.Technical SpecificationsWire SpecificationsGauge: 16AWG (1.31 mm²)Type: UL1015 Approved, 600V RatedInsulation: PVC, Blue Color-CodedTemperature Range: -40°C to +105°CWire Length: Standard 6″, 12″, 18″, 24″ (Custom Available)Current Rating: Up to 13A Continuous6.3mm Quick Release Terminal EndType: Female quick-disconnect with locking tabBlade Size: 0.250″ (6.35mm) wideLock Feature: Positive locking tab prevents accidental disconnectionMaterial: Tin-plated copper alloyCompatibility: Fits standard 6.3mm male tabs (0.250″ quick connects)Release Mechanism: Depress locking tab for easy removal4.2mm Ring Terminal EndType: Fully insulated ring terminalInner Diameter: 4.2mm (fits M4, #8, and 5/32″ hardware)Material: Tin-plated copperInsulation: Nylon sleeve (blue to match wire)Torque Rating: 1.2–1.5 Nm recommendedKey FeaturesHybrid Design: Combines quick-connect convenience with permanent, vibration-resistant ring terminal securityLocking Fast-On: Secure connection that won’t vibrate loose—locking tab must be depressed for removalProfessional Crimps: Factory-crimped with dual crimp (conductor + insulation) on both terminalsColor-Coded: Blue wire and blue insulation sleeves for easy circuit identification and organizationUL-Listed Wire: UL1015 certified for safety and reliability in electrical applicationsVibration-Resistant: Ring terminal end ideal for high-vibration environments; locking tab secures quick-connect endTime-Saving: Pre-assembled, ready to install—no cutting, stripping, or crimping requiredApplicationsAutomotive & Marine: Connect aftermarket accessories (fans, lights, radios) to battery/ground pointsIndustrial Control Panels: Quick-connect to relays/contactors with secure ring-terminal power sourceAudio/Amplifier Installations: Secure ring to battery or distribution block, quick-release to amplifierRV & Camping Electrical: Connect 12V accessories with removable capabilitySolar & Renewable Energy: Quick-connect to charge controller with ring terminal to batteryCustom Electronics: Prototyping, test leads, or permanent installations requiring one removable sideAgricultural & Off-Road Equipment: Vibration-resistant ring terminal combined with serviceable quick-connectInstallation InstructionsRing Terminal End: Secure under appropriate bolt/screw (M4/#8) using recommended torque (1.2–1.5 Nm)Quick-Release End: Align with 6.3mm male tab, push firmly until locking tab clicks into placeTo Disconnect: Depress locking tab on quick-release terminal and gently pull wire away from male tabRouting: Avoid sharp bends and excessive tension on either terminalPackage OptionsSingle Harness: One complete dual-terminal assemblyPair Pack: Two harnesses (often used for positive/negative runs)Custom Lengths & Colors: Available for bulk/OEM orders (min. 500 units)Why Choose This Hybrid Assembly?Versatility: Ideal for installations where one side needs to be serviceable/removable and the other side permanentReliability: Factory crimping ensures consistent, high-quality connectionsSafety: Fully insulated terminals prevent accidental shorts; locking tab prevents unintended disconnectsTime & Cost Efficient: Eliminates need for separate terminals, wire, and crimping toolsProfessional Finish: Clean, organized look with color-matched wire and insulationCompliance & QualityWire: UL1015 RecognizedTerminals: Manufactured to industry-standard dimensionsRoHS & REACH CompliantTested: Continuity and pull-test verified per batchPerfect for installations that demand both convenience and security.Select your preferred length and quantity at checkout. Custom configurations available for OEM/bulk orders.           

4.2mm Ring Terminal with UL1015 16AWG Yellow Wire

Product OverviewHigh-quality, pre-assembled ring terminal connectors featuring a 4.2mm inner diameter ring with premium UL1015 16AWG yellow wire. These connectors provide reliable, secure connections for automotive, marine, industrial, and electrical applications where vibration resistance and durability are critical.Technical SpecificationsTerminal Type: Fully insulated ring terminalInner Diameter: 4.2mm (fits M4, #8, and 5/32" studs/bolts)Wire Gauge: 16AWG (1.31mm² cross-section)Wire Type: UL1015 approved, 600V ratedWire Insulation: PVC, Yellow colorWire Length: Standard 6", 12", 18", 24" (custom lengths available)Current Rating: Up to 13A continuous (depends on installation)Temperature Rating: -40°C to +105°CCrimp Barrel: Tin-plated copper, bell-mouth entry for easy wire insertionKey FeaturesUL Certified: UL1015 wire meets rigorous safety standardsVibration Resistant: Ring design prevents loosening under vibrationColor-Coded: Yellow wire and insulation for easy circuit identificationDouble-Crimp Construction: Separate crimps for conductor and insulation provide superior strain reliefCorrosion Resistant: Tin-plated copper terminals resist oxidationBell-Mouth Design: Flared barrel entry prevents wire strand damage during installationWide Temperature Range: Suitable for engine compartments and outdoor applicationsFull Insulation: Prevents accidental shorts and improves safetyApplicationsAutomotive: Battery connections, ground straps, accessory wiringMarine: Boat electrical systems, battery connections, marine electronicsIndustrial: Control panels, machinery wiring, equipment connectionsSolar Power: Charge controllers, battery bank connectionsAudio Systems: Amplifier installations, speaker wiringRV/Camper: Electrical systems, lighting, appliance connectionsDIY Electrical: Home projects, workshop equipment, custom installationsDimensions & CompatibilityStud Size: Perfect for M4 bolts, #8 screws, 5/32" studsBolt Circle: Fits standard 4.2mm (0.165") diameter hardwareInsulation Dimensions: 10.5mm length × 7.2mm widthWire Strip Length: Pre-stripped to optimal length (typically 7-8mm)Installation GuidelinesVerify Compatibility: Ensure 4.2mm ring fits your stud/boltProper Tooling: Use ratchet crimpers (AWG 22-10) for optimal connectionCrimp Sequence: First crimp conductor, then insulation supportTorque Specification: Tighten terminal to 1.2-1.5 Nm (10-13 in-lb)Routing: Avoid sharp bends within 25mm of terminalPackage OptionsSingle Unit: One ring terminal with attached wirePair Pack: Red and yellow pair for positive/negative identificationMulti-Packs: 5, 10, 25, or 100 pieces for production or large projectsAssorted Kits: Mixed sizes with 16AWG wire for various applicationsCustom Configurations: Bulk wire on spools with pre-attached terminalsQuality AssuranceUL1015 Certification: Wire meets UL Standard 1015 for electrical safetyBatch Testing: Every production lot tested for continuity and pull strengthVisual Inspection: 100% inspection for proper crimp and insulationMaterial Traceability: Source documentation available for commercial customersSafety & ComplianceUL Recognized Component (File E495994)RoHS compliantREACH compliantCUL can meet CANADA MarketWhy Choose Our Ring Terminals?Superior Materials: Oxygen-free copper terminals with heavy tin platingProfessional Finish: Clean, consistent crimps every timeTime-Saving: Pre-assembled, no need for separate wire and terminal installationReliability: Tested to withstand vibration and thermal cyclingTechnical Support: Expert assistance for application questionsCompetitive Pricing: Industrial quality at accessible pricesFast Shipping: Most orders processed within 24 hours Secure, professional connections made easy! Select your preferred wire length and quantity at checkout. Custom wire colors and terminal configurations available for OEM applications (minimum order 500 pieces). Sel configurations available for OEM applications (minimum order 500 pieces).