- Product Detail
-
This is a custom-made electrical wire harness built with JST-series compatible housings and UL1571 PVC insulated wire. It is designed for compact and standard-pitch board-to-wire connections in consumer electronics, home appliances, LED lighting, industrial control panels, medical devices, and battery/sensor systems.
We support full customization on connector series, pitch, pin count, wire gauge, length, color, and termination style (dual-end crimp, single-end tinned/stripped, or pigtail).
Key Specifications
Connector series / pitch:
SH 1.0 mm
GH 1.25 mm
ZH 1.5 mm
PH 2.0 mm
VH 3.96 mm
(All JST-compatible, other pitches available on request)
Pin count: 2P / 3P / 4P / 5P / 6P / 7P
Wire type: UL1571 PVC insulated AWM wire, 80 °C / 30 V rating
Wire gauge (AWG): 22 / 24 / 26 / 28 AWG, tinned stranded copper
Insulation material: PVC (RoHS compliant)
Conductor: Bare or tinned copper, 7-strand
Length: Custom (25 mm – 5000 mm typical)
Color: Standard black/red/yellow/white/blue or per customer schematic
Termination: Crimped terminals in housing, opposite end stripped & tinned, or both ends matched connectors
Rated current: Depends on pitch/gauge — e.g. SH ~1 A, GH ~1.5 A, PH ~2 A, VH ~7 A
Rated voltage: 30 V (UL1571) to 250 V depending on connector series
Temperature range: -25 °C to +85 °C
Testing: 100% continuity & short-circuit test, crimp pull test, visual inspection
Compliance: UL1571 wire, RoHS, REACH; ISO9001 manufacturing
Features
JST-compatible precision housings with secure locking (where applicable)
Soft-strand UL1571 wire for easy routing in tight enclosures
Low-profile pitches (1.0–1.5 mm) for space-limited PCBs; 3.96 mm VH for higher current
Stable signal transmission, low contact resistance (≤ 100 mΩ typical)
Supports mixed-build orders: different connector on each end (e.g. PH2.0 to open tinned end)
OEM / ODM acceptable — send drawing, sample, or BOM
Typical Applications
Home appliance internal wiring (washing machine, AC, microwave)
LED strip and luminaire connections
PCB sensor and I/O wiring
Battery pack / BMS signal lines
Medical instruments and portable devices
RC models, drones, smart wearables
Industrial PLC and control cabinet jumpers
OEM Service
We accept low MOQ custom orders. Provide any of the following and we quote within 24 hours:
Connector brand/series + pitch + pin number
UL1571 gauge and color sequence
Harness length and termination drawing
Sample for reverse engineering
Lead time: 3–5 days for samples, 7–15 days for bulk (depending on volume).
Custom Electrical Wire Harness with JST-Compatible SH1.0 / GH1.25 / ZH1.5 / PH2.0 / VH3.96 Connectors, UL1571 PVC Wire 22–28AWG, 2–7 Pin, OEM Acceptable
Custom-engineered wire harness featuring SH1.0/GH1.25/ZH1.5/PH2.0/VH3.96 series connectors. Built with UL1571 PVC wire (22–28 AWG), available in 2–7 pins. Ideal for compact electronics, sensors, and power connections. 100% tested, RoHS compliant, and fully customizable. OEM/ODM accepted.
MOQ：
1000
Email:
carolyn@runqicable.com
Category:
Key Words:
Factory Introduction
Related Products
Contact Us
Factory Address: Floor 1to 3,Building B,Dingfang Industrial Area Tangjing Group BaiShi Village QiuChang Street HuiYang District HuiZhou City 516200
WhatsApp：
Email：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Shenzhen City Runqi Wire Co.ltd.,
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地